From: Paul Curtis (MicroSSG_at_Comcast.net)
Date: Tue Dec 09 2003 - 13:55:50 PST
I'm connecting the MP 120 2.0 to a Windows XP Laptop so I can back up my
120's contacts to restore them to both my 130/2100. I tried IrDA from
the 120 to the 130, but it puked after one contact. My laptop has no
serial port only USB, so I bought the Belkin adapter to connect. I see
the Newton "pinging" the laptop, but there is never a response. The
Belkin adapter has link/transmit/receive lights. Also when I configure
the ports in NCU I see the adapter respond to the commands, so I know
that both devices are able to hit the Belkin.
For hoots, I tried the MP 130 and the result is identical. I don't have
my MP 2100's dongle with me or I would try that as well.
Regards,
Paul Curtis
-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of Woody Smith
Sent: Tuesday, December 09, 2003 1:39 PM
To: newtontalk_at_newtontalk.net
Subject: Re: [NTLK] Newbie question about transferring data from one
Newt to another...
Paul
Your signature line includes 130 and 2100.
Are you connecting with them?
If your 120 is running os1.3 you cannot use NCU. You will need NCK2
Woody On Tuesday, December 9, 2003, at 02:28 PM, Paul Curtis wrote:
> I still haven't been able to connect the MP 120, does anyone have any
> ideas?
>
>
> Regards,
>
> Paul Curtis
> MP 120/130/2100
>
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/ -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Tue Dec 09 2003 - 14:30:00 PST