[NTLK] Recell Emate Batteries

[Rufus Kohn]

I am really sorry for causing confusion about the thermo sensor. What I meant was the tab that connects the bottom two poles. It has a small square yellow sticker on it with 
PB5l
L19
PB5L
I know now it isn't the thermistor. Is is a component that reduces charge current when the temperature exceeds 55c. 
Again sorry for any confusion
All the best

Rufus Kohn



.
 
  

Op 1 mrt. 2018 om 21:16 heeft Noah Leon <moosefuel at gmail.com> het volgende geschreven:

>> This holder have almost perfect dimensions. So, we only need 4x NiMH
> batteries to put inside, mount thermistor somewhere between NiMH batteries,
> and solder ?positive? and ?negative? cables to pins on original white
> connector. Piece of cake.
> 
> That's a cool battery holder!
> 
> I recently redid an emate battery using IKEA NIMH batteries, it works very
> well, I only used strong tape to hold the connections onto the battery, and
> to wrap it. Removing the contacts from the original batteries took a little
> bit of time since I was careful not to break them, and I fixed the hinge at
> the same time so that took a lot longer, but I am very happy with the
> result, the batteries are still working very well, they charge and provide
> a really lengthy run-time. They don't come loose when the eMate is jostled.
> I think the repair is not difficult, but expect to spend an hour on it.
> 
> noah
> 
> -- 
> Sent from Noah's Personal Gmail Account
> ----------------------------------------------------------------------
> 
> http://newtontalk.net/
> http://twitter.com/newtontalk