[NTLK] eMate Battery Pack Help

[Hilary Naylor]

Hi Frank, and others,
   It's working now. Either I was too impatient, or there is something
loose somewhere. I decided to do the hard reset (as someone else
suggested), and all the juggling about getting my finger on the power
button and pen onto the reset button at the same time, made something
connect and it suddenly powered up without doing the reset. The batteries
were already full charged, so the green light came on when the AC adapter
was plugged in. But now I've used it a bit, the light is orange.
thanks
Hilary

---
Date: Tue, 10 Jan 2017 23:38:55 +0100
From: "NewtonTalk" <newtontalk at pda-soft.de>
To: <newtontalk at newtontalk.net>
Subject: Re: [NTLK] eMate Battery Pack Help

>  But my eMate doesn't power up!

Does the battery charge? The LED at the back must be orange when you plug
the AC adapter in and turn green after some time. Depending on the charge
state of the battery and their mAh rating, it can take up to 3 hours until
they are fully charged.

Frank

-- Newton software and hardware at http://www.pda-soft.de

---
Hilary Naylor, Ph.D.
www.a2zed.us
Oakland CA