On Mon, Jul 27, 2009 at 11:39 AM, David Neale<david.neale@telenet.be> wrote:
>
> I have just switched off the Airport and moved the Ethernet cable from
> the Ethernet port to the Wan port. I then restarted the Airport.
> Checking with Airport Admin Utility, I see no change at all in the
> settings: the IP Address shown is still 10.0.1.1, as is shown on the
> webpage. Internet access from the Macs seems to work fine still. The
> Newton act in just the same way, however.
That IP address you're seeing is because you have it set to share a single IP.
What does it show in AirPort Admin Utility -> Internet for the IP
address? Does that become a 192.168.1.x IP address when connected to
the WAN port instead of the Ethernet port?
Morgan Aldridge
--- morgant@makkintosshu.com http://www.makkintosshu.com/ ==================================================================== The NewtonTalk Mailing List - http://www.newtontalk.net/ The Official Newton FAQ - http://www.splorp.com/newton/faq/ The Newton Glossary - http://www.splorp.com/newton/glossary/ WikiWikiNewt - http://tools.unna.org/wikiwikinewt/ ====================================================================Received on Mon Jul 27 11:52:41 2009
This archive was generated by hypermail 2.1.8 : Mon Jul 27 2009 - 13:30:00 EDT