Re: [NTLK] Good day of breaking parts

I am unable to find any of my small parts, I had a few internal
parts. they will turn up again but did not include the parts you seek.
I would forget about #4 since there is a small risk of it cutting
through the digitizer ribbon if dropped or struck while open.
#3 is not needed to hold the case securely closed. It was possibly an
access port for future development.
#1 doesn't usually separate from the front of the case. try <http://www.gementerprises.com/
>
or < http://www.jksalesinc.com>

Woody

On Jul 23, 2009, at 2:48 PM, Phil Muller wrote:

> There are many small items which I require some not as needed as
> others
> though.
> I really need a screen door latch located on the front of the case;
> this
> one was lost not broken. I just the other night broke the
> interconnect port
> covers hinge and later that night, I also proceeded to snap the
> screen door
> hinge inner cover, nearest the hinge pin lever. Should have seen
> that one
> coming, very little plastic = weak point. If you could help out that
> would
> be greatly appreciated, as I have all the newts I am going to buy
> now and
> don't really want to buy another MP2000 just for parts, well maybe I
> could...........
> recap: all for MP2xxx
>
> 1) front latch for screen door
> 2) rear screen door latch
> 3) small extra case clip on hinge side of newton
> 4) interconnect port cover
>

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Thu Jul 23 20:09:18 2009