From: James Nichols (smilr_at_mac.com)
Date: Sun Oct 31 2004 - 15:25:39 PST
I thought that rubbing alcohol was non-conductive for electricity, and
evaporated rather quickly - so I doubt that it "shorted" anything out
by getting where it should not have.
Just how far apart did you disassemble the newton? Are you sure all the
cables are connected everywhere? Have you pressed the reset button?
Which model newton do you have?
J Tyler Nichols
On Oct 31, 2004, at 5:16 PM, Bryce wrote:
> I don't own a Newton yet but if it's true they have an anti-glare
> coating on the display then you shouldn't ever use isopropyl alcohol
> on it. Water and a lint-free/non-abrasive cloth (chamois) is pretty
> much your only option. I have heard a super-light (and non-abrasive)
> detergent soap (highly diluted with water) can be used in place of
> just plain water to get dirt off.
>
> Regarding why your Newton isn't powering back on, there's a chance the
> alcohol got somewhere it shouldn't have. Did you remove all power
> sources from the Newton before cleaning the screen? If not, you may
> have shorted something out.
>
> Hopefully someone can add to this thread and help you out more. Best
> of luck to you.
>
> -Bryce
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Sun Oct 31 2004 - 16:00:02 PST