From: Newtopia (MicroSSG_at_Comcast.net)
Date: Thu Feb 19 2004 - 13:55:20 PST
Frank,
I have read these instructions a few times over the last few days preparing
for the rebuild event. My question is, have you tried to follow the original
seam, and if you did, what was the drawback to this method? And/or what
other styles have you attempted and what were the draw backs to them?
Although function is 95% of what I need, there is also the esthetics. More
on the point of functionality, I'm worried about repositioning the new cells
into the case without breaking any of the solder points. So this is why I'm
wondering if following the seams could work as well? In my mind I'm
imagining that it would be easier to take out / put back the cells?
Regards,
Paul Curtis - USA/OR
MP 120 v2.0/130/2100
Michigan State Spartans - Go Green! Go White!
-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of Frank Gruendel
Sent: Thursday, February 19, 2004 12:24 PM
To: newtontalk_at_newtontalk.net
Subject: [NTLK] Re - Battery rebuilds
> My rebuild battery is Ugly, but provides amazing run times...
> I sincerely recommend reviewing Frank's methods and documentation
> before proceeding.
So do I :-)
See http://www.pda-soft.de/mp2k_battery_pack.html (2x00) or
http://www.pda-soft.de/emate_battery_pack.html (eMate)
Oh, and just in case anybody is interested, for some weeks
I've been able to offer rebuilt packs without the necessity
to trade your old pack in. 65 Euros or 55 Euros if you make
a donation of at least 5 Euro or USD to NewtonTalk. Trade-ins
are still possible and still set you back 32 Euros for a rebuilt
pack.
Frank
-- Newton Software and Hardware at http://www.pda-soft.de
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/ -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Thu Feb 19 2004 - 23:00:02 PST