From: Newtopia (MicroSSG_at_Comcast.net)
Date: Wed Feb 18 2004 - 07:45:47 PST
Yup, it's the right one, I have the 120 & 130 and compared the electrical
requirements of the 2100 and noticed that I needed to buy the unit made for
the 2100. Which is where all this started; I just received the adapter
yesterday.
Regards,
Paul Curtis - USA/OR
MP 120 v2.0/130/2100
Michigan State Spartans - Go Green! Go White!
-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of MKow1234_at_aol.com
Sent: Wednesday, February 18, 2004 6:31 AM
To: newtontalk_at_newtontalk.net
Subject: [NTLK] Are You Using the Correct AC Adpter?
In a message dated 2/18/04 2:42:16 AM Eastern Standard Time,
newtontalk_at_newtontalk.net writes:
I noticed the same problem with my MP 2100. Turns out the AC adapter was
originally intended for an earlier Newton MP, and it kicks out slightly less
voltage and amperage. The good news is that if I plug in my MP 2100 and
leave it
turned off for a bit, the Ac adapter will still "trickle charge" the
battery.
> > I just got a power adapter for the MP2100 and when plugged in it
doesn't
> > appear to charge the battery, I tap the battery on Dashboard and it
says
> the battery is discharging and the power is coming from AC.
> I am assuming that if a battery pack is plugged into the MP and you plug
> > power to it from the adapter that it would charge the battery, no?
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/ -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Wed Feb 18 2004 - 11:30:01 PST