From: Woody Smith (woody_at_bitstream.net)
Date: Tue Aug 31 2004 - 15:30:56 PDT
Not to quibble but your will need a serial cable between the eMate and
the Keyspan USB to serial adapter. ADB is the same size but a
different pin configuration.
He will also need to install OS9 drivers if using classic and NCU.
Woody
On Tuesday, August 31, 2004, at 02:20 PM, Steele Campbell wrote:
> Hi Chris,
>
> Yes, to hook them up to your iBook you will need one (or more) of the
> following:
>
> ADB Cable & USB to Serial Adapter (the general consenus is to use the
> one made by Keyspan)
> Network Card (and a memory card with the drivers and NIE 2.0)
> An IR Port & Some luck (as I can't remember if the iBook supports this)
>
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Tue Aug 31 2004 - 16:00:01 PDT