From: Victor Rehorst (victor_at_newtontalk.net)
Date: Wed Aug 25 2004 - 12:55:55 PDT
Peter H. Coffin wrote:
> On Wed, Aug 25, 2004 at 03:02:57PM -0400, Victor Rehorst wrote:
>
>>Looking straight-on at the card connector, label side up, there is a notch on
>>the right side of the card. Is the notch at least half as thick as the
>>connector, or is it thin like the two notches on the left side of the card?
>
>
> Uhm, well... it looks like this:
>
> _ Front label
> _||:::::::::::::::::::::::||_
> Back label
>
> two key tabs on the left, one key tab on the right, on the back of the
> card side of the edge.
This I'm aware of :)
What matters is the thickness of the right tab. If it is 'thick' (at least
half as thick as the connector) then it is a 3.3V operation card. If it is
'thin' then it is a 5V card or 5V/3.3V card.
A better way to answer this is: does it fit in an eMate?
From the photos it looks like 5V to me...
-- Victor Rehorst - victor_at_newtontalk.net - chuma_at_chuma.org NewtonTalk list administrator - http://www.newtontalk.net Will the last person to leave the platform please turn off the backlight? -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Wed Aug 25 2004 - 14:00:02 PDT