From: Steele Campbell (the.vampire_at_gmail.com)
Date: Wed Aug 25 2004 - 00:00:50 PDT
Here are a couple of things you can try.
Remove the batteries and with the AC adapter plugged in, try resetting them.
Without batteries or AC adapter, pull the power switch into the "on"
position and jam it there. Leave it as such for 24 hours and then
remove the jam, put in batteries and plug in AC adapter.
Put batteries in, plug in AC adapter and leave to charge for 24 hours.
All have worked for me in the past.
It also might be possible that your power switch is dirty, try
cracking it open and cleaning the contacts.
-St.
On Wed, 25 Aug 2004 02:53:01 -0400, Ryan Rotter <rrotter_at_emich.edu> wrote:
> I have a 2000 and a 2100 that normally function great. I use them
> mainly for taking class notes, so they haven't seen much use over the
> summer. I hadn't turned either one on for a week or so. The battery
> was down to about 20% in the 2000, and the 2100 would not power up.
> Assuming a dead battery in the 2100 I switched the batteries and still
> had no luck. Next, I returned the good set of batteries to the 2000
> and it wouldn't power up! Now I can't get either one to turn on, even
> with the units plugged in to the AC adapter. Can anyone offer some
> help?
>
> --
> This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
> Official Newton FAQ: http://www.chuma.org/newton/faq/
> WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
>
>
-- Thank you kindly. -Steele -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Wed Aug 25 2004 - 09:30:02 PDT