Peter: I think you were right on the money. I opened the case up and
it seemed that the unit was not quite seated all the way. I held it
down and tightened all screws. Everything is back together and looks
OK but I'll have to keep my eye on that crack.I'm about to use the
SER-001 to download some serious reading (LTR) using NewTen and
Jaguar. Life is good!
Thanks,
Dale
>on 1/2/03 10:30 PM, Dale Steele at dtsteele_at_mac.com wrote:
>> Has anyone else noticed this after they added this most
>> useful upgrade?
> I have two 2100s with SER-001 upgrades. No cracks on either one.
> Did you perchance leave a bit of a bump on the back of the Newt after
>installing the SER-001? If so, it's probably not seated properly and could
>be stressing the case (I ran into this problem when installing an SER-001 on
>a friend's Newt _ it seems to happen on Newtons that have never been opened
>before). Removing and reseating the SER-001 (and making sure both screws are
>in place) should fix the problem.
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Sun Jan 26 2003 - 04:01:44 EST