From: Stocker, Michael (mstocker_at_accelent.com)
Date: Fri Feb 07 2003 - 05:13:41 PST
John,
You need a NCU running on your host PC.
There are both Win and Mac versions available at:
http://www.unna.org/unna/apple/connection_utils/
You also might want to browse around www.una.org for other Next =
software.
Mike
-----Original Message-----
From: John Webb [mailto:johnwebb1_at_mac.com]=20
Sent: Friday, February 07, 2003 8:02 AM
To: newtontalk_at_newtontalk.net
Subject: [NTLK]=20
Hello Everybody,
I just became a proud owner of a Newton 130! Boy, this has it all over=20
any palm I have ever seen!
Sorry for the questions I am about to ask, but as stated before, I=20
haven't even had this Newton for 24 hours!
First, I am trying to connect my Newton to my Powerbook 3400 through=20
the serial port with no luck! What am I missing? The error message is "=20
no connection found" even though both have been hooked up to the cable=20
and both are set to serial port.(I know that I must be missing an=20
important link to the puzzle somewhere.
Since I do not have a modem card yet(next on my list of purchases),=20
what would you recommend? Should I buy new? Or should I go and do the=20
Ebay thing?
Many thanks in advance for your advice,
John :-)
"Newton owners are happier people..."=20
=20
--=20
This is the NewtonTalk list - http://www.newtontalk.net/ for all =
inquiries
List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html
Official Newton FAQ: http://www.chuma.org/newton/faq/
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Fri Feb 07 2003 - 06:00:00 PST