1) Which MP you have? for MP2x00 you need a dongle or the SER-001 installed.
2) Do you want to connect to PC or Mac? You need the appropriate cable.
3) If you use a Mac, does it have a serial port? The more recent models do
not have a serial (printer/modem/AppleTalk)port anymore, but USB instead.
4) Install NCU on your computer, start it, connect your Newt, start the
docking application on your Newt, select serial connection - thats it.
In case you have a Mac w/o serial interface I would recommend to use
Ethernet.
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Christopher
> Edwards
> Sent: Thursday, November 21, 2002 4:50 AM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] NCU via a serial connection?
> Is it possible to use NCU via a serial connection? What do I need to do to
> get this to work?
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.2 : Mon Dec 02 2002 - 22:03:13 EST