The contacts are located near the power switch but UNDER the pen holder
assembly.
The pen holder assembly presses down the flexible PCB (coming from the
screen) down to the logic board connection pads.
If needed I could send a photograph off list.
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Smith, Bradley
> Sent: Tuesday, March 05, 2002 10:48 AM
> To: 'newtontalk_at_newtontalk.net'
> Subject: Re: [NTLK] Screen Misalignment and request for fixes
>
>
> Which contacts are we talking about here?
> I took mine apart and removed the ribbon connecting the screen to the main
> board and cleaned it. It did help a bit but it's still out of
> alignment. Do
> I need to clean some other contacts?
>
> Brad
> > From: Heiko Cultus [mailto:Heiko.Cultus_at_edag.de]
> > Sent: 05 March 2002 08:35
> > To: newtontalk_at_newtontalk.net
> > Subject: Re: [NTLK] Screen Misalignment and request for fixes
> >
> >
> >
> > I can agree on this. I have opened my Newton last sunday,
> > because of a screen
> > misalignment, cleaned the contacts and everything was fine again.
> >
> > Heiko
>
> --
> Have you checked the FAQ lately?
http://www.guns-media.com/mirrors/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net
To unsubscribe/manage: visit the above link. Questions:
victor_at_newtontalk.net
-- Have you checked the FAQ lately? http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net To unsubscribe/manage: visit the above link. Questions: victor_at_newtontalk.net
This archive was generated by hypermail 2.1.2 : Tue Apr 02 2002 - 14:02:09 EST