> It doesn't work!! I can change the levels on the multiplier pins but it
> doesn't seem to work properly. It either works at the same speed or hangs.
> Has anyone else looked into this? Any hints and tips from the hardware
> gurus greatly appreciated.
>
Hi Andy. I tried this approach a few months ago. Gave up because i could
not see any difference either. I tried many different configurations and none
did anything, the newt worked at the same speed.
IMHO the multiplying factor is fixed in the chip. I know the 162 mark on
the SA can mean that it didn't pass a higher speed test, but it also can mean
that it's locked to that speed.
BTW, I think it would work ok if it wasn't locked, there are different
multiplying references for memory and core speeds.
Let us know it you find anything!
Daniel Padilla
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Thu Aug 01 2002 - 06:02:17 EDT