Hi,
IIRC people have been using flash cards taken from Cisco routers for ages.
The only problems I've heard about relate to the life of he cards.
I think the router uses them to store routing info (unsurprisingly ;-) )
and this info can change frequently. As Flash memory has a limited number
of write cycles, they tend to wear out.
Obviously, this problem comes from the use of the card, not the card
itself. So, if the card is new, it should last just as long as any other,
non-Cicso card. If it's pulled from a router it could be on its last legs.
As an after thought... Could Cisco have changed to ATA cards? After all,
they must be facing the same problems as the Newties in finding linear
cards. Hmmm could be.
On balance my advice would be not to risk it.
Cheers.
Andy.
At 09:54 01/07/2002 +0100, you wrote:
>erm,
> I use a 16M Intel Series 2+ 'Cisco' Card with no problems.
>
>M
>
> >
> > Hi Gliseb,
> >
> > This card's is driver is only for a Cisco router and will not work on
> > the newt. I purchased one in this January and returned it for a full
> > refund.
> >
> > Regards,
> > Pilar Arturo
> >
> >
> >
> > >Hello!
> > >
> > >I have found the following item on eBay:
> > >
> > >CISCO PCMCIA FLASH Card 16M for 7500 (Intel Series 2+)
> > >
> > >All I can find about this card is this is a proprietary Cisco router
> > >flash memory card. I wonder if this is a linear memory card suitable for
> > >Newton 2000U. Anybody had any experience with these cards?
> > >
> > >Thanks!
> > >
> > >Gleb Dolgich
> > >
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Thu Aug 01 2002 - 06:01:35 EDT