[NTLK] MP2100 speedup

From: Stephanie Maks (steph_at_maksystems.com)
Date: Thu Jun 14 2001 - 10:18:54 PDT

• Next message: Loren Finkelstein: "[NTLK] FW: Auto-removed from newtontalk"
• Previous message: John M. Powell: "[NTLK] Re: Newtourage is great!"
• Next in thread: Glenn Roe: "[NTLK] Flash card problem"
• Reply: Glenn Roe: "[NTLK] Flash card problem"
• Reply: Ed Kummel: "Re: [NTLK] MP2100 speedup"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

I did not find a source for the small clock crystals (although I think
DigiKey -- http://www.digikey.com -- probably carries them).

I used was careful enough removing the original crystal that I could re-use
it as part of the switch, and used a normal-sized one for the 5.0 MHz
crystal. I laid both crystals flat overtop of the StrongARM chip, after
sealing them in scotch tape to prevent short circuits. There is enough
clearance in the Newt to allow them to lay on their sides in between the
processor and the back case.

-Stephanie

> ...and have you (or anyone else) found a source for the small clock crystal?
>
> I'm tingling with anticipation!
> --
>

--
This is the Newtontalk mailinglist - http://www.newtontalk.net
To unsubscribe: newtontalk-request_at_newtontalk.net with 'unsubscribe' in 
the BODY.  Unsubscribe messages sent to the list will be filtered.

• Next message: Loren Finkelstein: "[NTLK] FW: Auto-removed from newtontalk"
• Previous message: John M. Powell: "[NTLK] Re: Newtourage is great!"
• Next in thread: Glenn Roe: "[NTLK] Flash card problem"
• Reply: Glenn Roe: "[NTLK] Flash card problem"
• Reply: Ed Kummel: "Re: [NTLK] MP2100 speedup"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2.1.5 : Sat Mar 08 2003 - 11:37:02 PST