From: John Dickie (J.Dickie_at_LTScotland.com)
Date: Thu Jun 14 2001 - 03:30:48 PDT
Stephanie (&Woo &others),
Thanks for the info - I'm not sure how confident I am about performing
brain-surgery on my wee green pal. I think I'll wait till there are some
pictures to follow!
What's the real-world difference in speed for an eMate? Is it very obvious
or kind of Mac Plus to LCII speedup? I use a D-Link 660 ethernet card for
docking - might that process be affected?
Sorry for all these questions!
John
> ----------
> From: Stephanie Maks
> Reply To: newtontalk_at_newtontalk.net
> Sent: Thursday, June 14, 2001 03:18 AM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] Emate speedup - was Implant troubles...can't turn of.
>
> Hi All,
>
> I recently over-clocked my eMate, and my MP2100. In both cases the cost
> was
> < $10 or so. It's a hack, and not as pretty like the Implant. It's just
> a
> simple matter of removing the 3.686 MHz crystal from the motherboard then
> setting up a hardware switch to let you switch between a 3.686 MHz and a
> 5.0
> MHz crystal. You need to use the 'normal' speed to use the serial port
> and
> stuff, but otherwise can leave it sped-up for most everything else. The
> real-time clock is unaffected. There's instructions out on the web to do
> it
> to the MP2x00, doing the eMate is even easier due to all the free space
> inside it. I'm really busy right now but am going to put instructions and
> pix on my web site when I can, probably in July some time.
>
> -Stephanie
>
> See: http://sine.ath.cx/mpoc.html for the MP2x00 details.
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe: newtontalk-request_at_newtontalk.net with 'unsubscribe' in the BODY. Unsubscribe messages sent to the list will be filtered.
This archive was generated by hypermail 2.1.5 : Sat Mar 08 2003 - 11:37:02 PST