------
Hi Kenny,
How did you actually get the Cross tip transplanted to the
PDA Panache stylus? How did you remove the Panache tip?
Did you just glue the Cross tip in?
--Regards, Howard ------ Hello Howard, Removing the PDA Panache tip is the easiest part. Just use a long nosed plier to slowly ease it out by turning. The tough part is removing the Cross tip. It took me a good half hour. This involve cutting through the metal tube and tearing them open carefully without scaring the soft Cross tip. The Cross tip's diameter is smaller than the PDA's so you need to insert it into a bigger tube then inserting that into the PDA stylus. I use the hollow plastic tube of a cotton bud (UK) or a Q-Tip (in the US). Make sure it's a tight fit or add a little super glue.
Here's the catch. Make sure the length of the installed tip is exactly the same as the stock stylus. If not, the stylus will not stay in the stylus holder or worse yet, it get's caught in the holder.
This is not a very difficult procedure and is well worth the effort if you like the Cross tip, the PDA Panache stylus and the convenience of a stock stylus in its original holder.
Kenny Song <Sent with Newton Messagepad/SimpleMail v 3.3.1d1> ****************************************** This month's NewtonTalk brought to you by:
EVOTE.COM, the ultimate Political Junkie site on the 'Net.
The Clinton Administration, the George Bush 2000 Campaign, and almost every other major U.S. politician has said something nasty about us at some time. Find out why at: http://www.evote.com
******************************************
Need Subscribe/Unsubscribe info? Visit http://www.planetnewton.com
This archive was generated by hypermail 2b29 : Tue Feb 01 2000 - 00:00:57 EST